Spraying fruit trees against pests in early spring

The Importance of Preventive Maintenance in the Garden

Chemical processing of fruit trees – a truly life-saving measure for all plants. Experienced gardeners believe that neglecting this procedure can result in the gardener not only being left without fruit but also losing a significant portion of their trees and shrubs. Absolutely all fruit-bearing plants in the garden require care. Moreover, it's much easier to take the necessary preventative measures promptly than to spend time and, often unsuccessfully, treating diseased trees.

The first stage of spraying is typically carried out in March. From this point until the final harvest, several stages of garden treatment must be completed. Determining the optimal method for distributing the active ingredients of pesticides onto bushes and fruit trees is quite simple. Today, a variety of specialized devices and equipment are available for this purpose, ranging from large sprayers to compact atomizers.

It's important to remember that inhaling aerosols during gardening should be avoided, as any chemical contains a significant amount of toxin. If inhaled, such substances can pose a health risk. Therefore, the best solution is to use a respirator when spraying.

Features of preventive maintenance in the garden

To eliminate the already present parasite larvae or to prevent the appearance of pathogenic microorganisms that provoke diseases It's important to know exactly what to treat fruit trees with in early spring. Pests, insects, and other problems can only be eliminated by treating each crop individually; you can't skip plants.

Three scheduled spraying sessions are generally sufficient throughout the spring and summer. Fungicide solutions often used by gardeners remain active for 10-14 days, which also allows trees and shrubs to have a mandatory break between each spraying. The appearance of fruit set indicates the need to immediately stop chemical treatments: it is strictly forbidden to apply the products later than two weeks before the final harvest.

Most chemical treatments for fruit trees are based on the above recommendations, but the manufacturer always reserves the right to make certain adjustments to the preventative treatment guidelines. Therefore, when preparing to use any product, it is important to read the instructions beforehand.

The most common garden problems are:

• aphids;
• powdery mildew;
• silkworm;
• flower beetle.

This is far from a complete list of potential threats to fruit crops. Each poses a risk to both the fruit and the plant itself, so by taking care of your garden plot and choosing from a wide range of pest control products for fruit trees in early spring, you can ensure your peace of mind and the health of your beloved garden.

It's also worth noting that preventative measures for shrub crops are more simplified. The intensity and frequency of treatments for raspberries, currants, gooseberries, and other berries largely depend on the condition of the plants after winter. It's important to stop spraying the bushes once the first berries appear. Learn all about cherry diseases and their control.

Spraying trees in the garden: preparation and stages

It's best to choose a day for spraying when the weather conditions are favorable. A calm, dry atmosphere is ideal. A slight humidity will promote even distribution of the active ingredients across the leaves, stems, and branches.

The first step is to get rid of pests that have overwintered on the plot. These insects are particularly resilient and hardy, so before treating fruit trees for pests in early spring, a video can be helpful. Experienced gardeners often share their tips and tricks for chemical spraying.

The second step will be tree processing, fruit, and berry crops after the first green leaves appear. The choice of chemical at this stage of the preventative treatment is extremely important. Once the leaves appear, it's time for treatment, which will determine the further development of the plant. A mistake in choosing a product can result in low resistance to infections and parasites, poor flowering, and, as a result, a meager, unhealthy harvest. The third time, pesticides are applied after the plant has finished flowering.

Chemical-free treatment: pros and cons

Proponents of more natural methods of combating pathogenic microorganisms believe it's better to follow old-fashioned gardening practices than to chemically treat fruit trees for pests in early spring.

The most common folk remedy is a salt solution, which can be prepared using a bucket of water and 100-150 grams of table salt. Before applying the solution, dig around the tree and remove any old, unwanted branches and shoots. Many gardeners believe that salt is quite dangerous for infections and parasites. However, in reality, it is not strong enough to completely disinfect the plant. However, it is actively used to prevent scab.

The chemical and effective “answer” to the salt treatment method can be called the following preparations:

• "Neoron;
• "Skvor";
• "Fundazol".

These products have proven their effectiveness over a long period of time. Having never failed gardeners, they have become the most popular and sought-after pesticides for garden treatment. Every gardener should know How to treat apple trees in spring against diseases and pests to obtain a large harvest of these fruits.

Another alternative method for combating diseases and pests requires clarification: urea. It's used by diluting it in a bucket of water (50 grams per 10 liters). It's truly effective for prevention: it performs its disinfection function perfectly, and, compared to complex chemical compounds, it's virtually harmless.

How to choose the best drug?

So, how should you treat fruit trees for pests in early spring? Gardening and gardening forums may offer invaluable advice, but ultimately, the responsibility for choosing the right product rests with the garden owner. They must consider many important factors: the pest's intended area of ​​action, the type of pest or infection, the timing of spraying, and much more. However, promises from manufacturers or unscrupulous sellers should never be relied upon when deciding whether to purchase a specific product.

In any case, you can use either single-component products or those that guarantee relief from multiple problems at once. For example, "Kinmix" or "Fury" are designed exclusively for the purpose of killing leaf-eating caterpillars, and the results leave no doubt about their intended purpose.

To combat pesky weeds, people often resort to Roundup. This powerful product eliminates weed growth almost 100%, but careless use often results in damage to fruit trees as well. Roundup should never come into contact with the trunks of useful crops. Small rodents and bark beetles are also a significant nuisance. Zernotsin can help combat this problem.

Choosing the right product for your garden is a difficult task, but once you've mastered it and completed all the required spraying procedures on time, as recommended by more experienced gardeners, you can consider yourself successful. All that remains is to hope for favorable weather conditions for the fruit to fully ripen.